F1

(188 customer reviews)

F1

(188 customer reviews)

$42.00

The supremely versatile F1 camera strap is sleek, fast, and expedition-tough!

Striking the ideal balance of comfort and breathtaking sleekness, for most small and moderate-size cameras (or as a “minimal” strap for larger cameras) — F1 is built in USA for photographers that prize its rare combination of understatement, performance, and agility. more…

$42.00

The supremely versatile F1 camera strap is sleek, fast, and expedition-tough!

Striking the ideal balance of comfort and breathtaking sleekness, for most small and moderate-size cameras (or as a “minimal” strap for larger cameras) — F1 is built in USA for photographers that prize its rare combination of understatement, performance, and agility. more…

Camera Straps Made in USA

Details

Stowed Safely, to Shooting Freely

Go from having your camera securely cinched up, for easy mobility — to slung low, for unhindered portrait and landscape shooting — just by pulling the F1’s adjustment tab.

Instead of tacking-on over-engineered hardware, it’s made from the same strong, flexible, lightweight fabric as the strap — plus a simple yet secure sliplok that won’t budge under load, no matter how heavy your camera.

One Strap That’s Up for Anything

To be clear, the F1 functions beautifully as a neck strap, but it’s much more versatile than that.

Quickly lengthen the F1 to use as a cross-body/sling strap, or loop the webbing through the D-rings to make a wrist strap — all without carrying (or remembering to carry) extra stuff.

We’ve heard tales of photographers literally tying their F1’s onto things, and attaching the D-rings or adjustment tab to carabiners for peace-of-mind. Use your imagination — F1 can take it!

Light, Strong & Built Tough in USA

A lot of camera straps are stuck in the past … unnecessarily bulky, made from traditional low-tech materials and metal hardware.

We take a different approach, using materials found in modern expedition gear, where strength-to-weight ratio is critical, and exposure to the elements is a given.

If you’re looking for a faux-heirloom made of leather and steel, you’ll have to look elsewhere — because we won’t make camera straps that rust, rot or crack after a downpour (especially for today’s weather-sealed cameras).

Sleek Where it Matters Most

Not all cameras are the same, so we’ve got two optimized mounting options, reducing bulk around the hand when possible.

For cameras that require a “traditional” flat mount, we use hardware developed by aerospace engineers, for cameras being sent to … you guessed it … space. And to tidy up the loose ends, we developed a streamlined installation method.

The barely-there lug mount version (shown here) comes with our proprietary Standard Split Rings, made from a steel and magnesium alloy that’s 25% stronger than stainless steel. It’s almost like holding a naked camera — but much more secure.

Lug Mount Detail

Specs

Best for

Crop-Sensor DSLR, Mirrorless Camera, Small Mirrorless Camera, Micro Four-Thirds Camera, Compact DSLR, 35mm SLR, 35mm Rangefinder

Connector(s)

Flat Mount: Heavy-Duty Acetal Sliplok & Keeper on 3/8" (10mm) Webbing, Lug Mount: Steel/Magnesium Alloy Simplr Standard Split-Rings (included)

Length

Adjustable from 36"–56" (91.4cm–142.2cm)

Width

1" (25.4mm)

Weight

1.4oz (40g)

Fabrication

Mil-Spec Nylon Webbing, Heavy-Duty Acetal Hardware, UV-Resistant 100% Polyester Thread

Construction

High-Strength Bartack Stitching

Origin

Made in USA

Press

Jack Wang: Accessorizing the Nikon Z6III

Scientist and street photographer Jack Wang recently released this video on how the Nikon Z6III can be accessorized to make it more evocative of Nikon’s new-retro Zf. In it, he spends a little time talking about camera straps: “The most functional strap I own … has to be the Simplr F1. Ultra-minimal and light mil-spec […]

Wired: Fujifilm X-T5 Review

Wired magazine has posted a wonderfully thorough review of the Fujifilm X-T5, referring to it as “…the best camera the company has ever made.” Nestled within this article, reviewer Scott Gilbertson reveals his preferred camera strap: “I prefer minimal straps like the Simplr F1, but for something included with the camera, Fuji’s strap is actually […]

Flemming Bo Jensen: Live Music + Fujifilm X-T5

In this official Fujifilm video, Flemming Bo Jensen, concert photographer extraordinaire, discusses how the X-T5 helps him capture the spirit and excitement of live music — while photographing Copenhagen-based singer/producer Saveus. “A camera is a tool for me. It needs to function purely on muscle memory, and become invisible.” Flemming is a long-time Simplr product abuser […]

More F1 Press & Sightings

How-To

Convert Your F1 to a Wrist Strap

Quickly changing your F1 camera strap from a long sling-style strap to a traditional-length neck strap needs no explanation — but converting it to a wrist strap is less obvious. Watch this video to see how easy it is! Shorten the strap all the way. Loop it through the D-rings. There is no step 3. […]

Install a Lug Mount F1 Series Strap, or Split Rings

*If you’re just installing Simplr Split Rings, not an F1 camera strap, you can skip straight to 1:07 in this video. Mounting a camera strap with split rings is just like putting a key on a keychain — but instead of a key, it’s a camera. Situate your Lug Mount F1 or F1ultralight so the […]

Install a Flat Mount F1

The flat mount version of our F1 camera strap installs similarly to a “traditional” camera strap, with a significant difference — the sliplok and keeper are used only for installation, not to adjust the length of the camera strap. Situate your F1 so the adjustment tab is in front of your body when the camera strap […]

Accessories

Customer Reviews

4.87 out of 5 stars

188 reviews

Already have it? Share your thoughts.

Most Recent Reviews

  1. Minimalist but efficient

    Dominik

    Clever adjustment. A small protection (removable) on the back of the neck could be useful for heavier DSLRs.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Best camera strap… EVER!

    Wayne Wong

    Got the F1 strap for my Fujifilm X-T3. When I first got it, I thought there was a mistake… these straps are light, but with use, I’ve found them to be robust and really strong! Love the simplicity of it and love the multiple ways of using the strap from sling to wrist strap. Couldn’t ask for more.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Good Sling, Decent Wrist Strap

    Dirk

    As a sling it’s a swank upgrade from the freebie that came with my camera. Comfortable to wear, no scratchy metal hardware, easy to loosen/lengthen, if a bit annoying to tighten/shorten.

    If you follow the Simplr instructions to convert to a wrist strap the loop is much too large to provide any security — it’ll slip right off your hand and dump the camera on the pavement. But if instead you cinch the strap about half way before feeding it back thru the D-rings, then the wrist loop is tight enough that it won’t slip off. It’s a bit clumsier than a dedicated wrist strap, but the convertible aspect is super handy.

    I got the flat mount version so I can hook it up to a pair of Peak Design anchors.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Simplr

      Thanks for liking our stuff, Dirk! A couple points of feedback … One: The length of the strap and position of the adjustment tab have both been carefully considered. By adding Peak Design anchors onto your strap, you’ve lengthened the strap significantly, which means the adjustment tab is no longer in an optimal position. F1 is light and sleek enough that you’ll feel little need to remove it (we’ve heard this so many times from users), so try it without the anchors as it was designed! Two: Although the wrist-conversion isn’t intended to be tight around your wrist, it still sounds like you may be doing something wrong. Not a bad idea to re-watch the video here on the F1 page to make sure you’re doing it right.

      Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Works as advertised!

    Alex M

    Finally caved and gave this a try after getting ads on Instagram for a while. I’m glad I did – the provided rings are sturdy and lie flat against the camera body when you’re using the camera. The straps cover everything they need to, and protect the body from getting scuffed by the rings. Nice, thoughtful, minimalist design. The only problem I can see with this business model is that I’m never going to need another strap.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Simple and Elegant

    Chris

    For a long time, I eschewed neck straps in favor of a simple neoprene wrist strap that allowed me to carry the camera in my hand but prevented it from falling if I were to lose my grip on it. Over the years, however, I got tired of having a heavy camera/lens combination in my hand all the time like this. I purchased an F1 for my rangefinders and fitted the ends of the strap with small gate hooks to allow it to be transferred from one camera to another easily (and I have the neoprene wrist straps with gate hooks as well for when I may still want to carry the camera that way). Simplr’s split rings are permanently on all of my rangefinders. Recently I purchased a new mirrorless camera with flat mounts, so I got a new F1 for that camera. Simplr straps are elegant but minimalist. I love the method Simplr devised for keeping the ends of the mounting straps neat. These straps don’t call attention to you or to your camera. They just do what they are supposed to do. Thanks to Simplr, I am now much more likely to have a camera with me when I am out and about. And when you have a camera with you, you get the opportunity to perhaps capture something amazing!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Best camera strap

    Stephane

    I have tried to find the simplest, most minimalist, most comfortable camera strap for years and this is the best one I ever owned. The feel is amazing, it’s incredibely lightweight and still feel strong. Being used to small leather or rope straps, I was worried I would find it too large but it’s also very slim and takes virtually no space in my bag. Having a camera with flat mount, I always found the other straps to be bulky and not great looking, but Simplr found the best, simplest way of connecting.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Liberated!

    TR

    I THOUGHT I needed a camera strap with disconnectors. When actually, I just had an overweight camera strap, and the connectors were one more reason I wanted to REMOVE it. No more carrying a strap, and a wrist strap, plus a bag to carry whatever strap I wasn’t using. Now I just have a camera and an F1, and want for no more. Thank you SIMPLR for putting my camera gear on a much needed diet!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. A Solid Strap

    Rene

    I had previously bought an Ultralight F1 strap for my Fuji X100V and was quite pleased with it. When I recently acquired a Fuji XPRO-3, I decided the larger strap would be better. It turns out to be perfect for this camera and I’m quite happy with it. I looked at a lot of straps before deciding on the Simplr straps and, yes, other straps may be “cooler” or “hipper” or more stylish but the value of this strap can’t be beat. I’ve been an outdoor/event photographer for 40+ years and have used many straps. This is THE best strap for the money out there.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. What I've been looking for

    Ross

    Great utilitarian strap, unfussy, not rough material but feels strong, and being able to turn it into a hand strap is something I’ve wanted from a strap for a long time. Highly recommended!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Best strap for mirrorless cameras

    Aaron

    Quick adjustment, high quality, and lightweight. The size is very suitable for mirrorless cameras. I investigated in a competing product also with quick adjustment, but it looks like wearing a parachute or seatbelt. Yes you can find many cheaper straps, but the F1 is a neck strap, sling strap, and wrist strap all in one.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Sign In

Continue as a Guest