$74.50 $67.50
The M1 Field Kit bundles an M1a Mirrorless Camera Strap, M1w Mirrorless Wrist Strap, four additional Mini QD Loops, and our proprietary split rings (and saves you some bread).
Don’t obsess over whether you should outfit your camera with a neck strap or a wrist strap. Carry both, with virtually no weight or space penalty. You can swap them at will, in seconds flat, because both use the same quick-release connector. With four additional Mini QD Loops, you can even share those two straps amongst three cameras, or just have some spares on hand.
For more details, visit the individual product pages, linked below:
| Best for | Mirrorless Camera, Small Mirrorless Camera, Micro Four-Thirds Camera, Compact Camera, Compact DSLR, 35mm SLR, 35mm Rangefinder |
|---|---|
| Tensile Strength | 44lbs (20kg) |
| Ideal Load | 2.5lbs (1.13kg) or less |
| Connection Style | Quick-Release |
| Connection | Lug or Flat Mount |
| Connector(s) | Op/Tech USA Mini QD Loops™ with 1.5mm Nylon Cord |
| Length | Adjustable from 36"–56" (91.4cm–142.2cm) |
| Width | 1" (25.4mm) |
| Weight | 1.6oz (45g) |
| Fabrication | Mil-Spec Nylon Webbing, Heavy-Duty Acetal Hardware, UV-Resistant 100% Polyester Thread |
| Construction | High-Strength Bartack Stitching |
| Origin | Made in USA |
| Best for | Mirrorless Camera, Small Mirrorless Camera, Micro Four-Thirds Camera, Compact Camera, Point & Shoot Camera, Compact DSLR, 35mm SLR, 35mm Rangefinder |
|---|---|
| Tensile Strength | 44lbs (20kg) |
| Ideal Load | 2.5lbs (1.13kg) or less |
| Connection Style | Quick-Release |
| Connection | Lug or Flat Mount |
| Connector(s) | Op/Tech USA Mini QD Loops™ with 1.5mm Nylon Cord |
| Length | Opening Adjustable up to 7" (18.4cm) |
| Width | 0.5" (12.7mm) |
| Weight | 0.3oz (8.5g) |
| Fabrication | Mil-Spec Nylon Webbing, Heavy-Duty Acetal Hardware, UV-Resistant 100% Polyester Thread |
| Construction | High-Strength Bartack Stitching |
| Origin | Made in USA from Domestic and Imported Materials |
| Made by | OP/TECH USA |
|---|---|
| Quantity | Set of Four |
| Cord | 1.5mm Braided Nylon |
| Tensile Strength | 44lbs (20kg) |
| Length | Approximately 2.5" |
| Width | Accommodates 3/8" (12.7mm) Webbing or 550 Paracord |
| Origin | Made in USA |
| Connection | Lug or Flat Mount |
| Tensile Strength | 80lbs (36kg) |
|---|---|
| Inside Diameter | .423" (10.74mm) — Accommodates Webbing or Cord up to 3/8" (10mm) Wide |
| Outside Diameter | .542" (13.77mm) |
| Thickness | .083" (2.11mm) — Fits Virtually all Camera Lugs, Including Nikon, Leica, Olympus, Sony, Fujifilm and Traditional 35mm Cameras |
| Wire Gap | .236" (6mm) — Won't Compress Cord Loop Connectors like Peak Design Anchor Links™ or OpTech USA Mini QD Loops™ |
| Composition | Steel and Magnesium Alloy, Nickel-Plated for Corrosion Resistance |
| Origin | Made in USA |
| Quantity | 4 Rings per Pack |
*If you’re just installing Simplr Split Rings, not an F1 camera strap, you can skip straight to 1:07 in this video. Your new F1 will be more pleasant to use if you do a quick “break-in” before installing it on your camera. Adjust the strap from minimum to maximum length about twenty times, by holding […]
Unless you’re 100% certain that your camera has smooth lugs, it’s best that you attach Mini QD Loops via split rings. Furthermore, we suggest that you use ours, as they’re uniquely designed to work beautifully with the cord loops (much better than the triangular ones). 1. Thread the cord loop through the split ring. 2. […]
Before attaching Mini QD Loops directly to strap lugs, read this important post: Strap Lug Inserts: What are they and why should I care? Unless you’re 100% certain that your camera has smooth lugs, it’s best that you attach Mini QD Loops via split rings, as outlined here. 1. Thread the cord loop through the strap […]
What They Are Strap lug inserts are hardened metal “sleeves” located inside strap lugs. They’re meant to reduce metal-on-metal wear caused when hard steel split rings rub against softer metal lugs. Some cameras have strap lug inserts and some don’t. Fujifilm cameras are notorious for having potentially jagged strap lug inserts, and all modern Fuji cameras including […]
If you’ve got a Fujifilm camera, and you’d like to attach your Mini QD Loops™ directly to your camera, you might* be able to remove your strap lug inserts to reveal a smoother point of attachment. Please note that if you scratch a strap lug during this procedure, you could very easily make them sharper than […]
For reviews, visit the individual product pages, linked below:
