Split Rings, 4‑Pack

(26 customer reviews)

Split Rings, 4‑Pack

(26 customer reviews)

$6.00

Want to upgrade your non-Simplr camera strap? Start with its weak link.

Made exclusively for us in the US from a unique steel/magnesium alloy, these aerospace-grade round spring-tempered split rings are 25% stronger than stainless steel — and unlike stainless or titanium, they always spring fully-closed. They’re burnished and tumbled for smoothness, then nickel-plated for corrosion resistance.

Ideally sized for 3/8″ (10mm) webbing … the width used on most camera straps.

$6.00

Want to upgrade your non-Simplr camera strap? Start with its weak link.

Made exclusively for us in the US from a unique steel/magnesium alloy, these aerospace-grade round spring-tempered split rings are 25% stronger than stainless steel — and unlike stainless or titanium, they always spring fully-closed. They’re burnished and tumbled for smoothness, then nickel-plated for corrosion resistance.

Ideally sized for 3/8″ (10mm) webbing … the width used on most camera straps.

Camera Straps Made in USA

Details

Normally, you don’t hear lengthy descriptions about the seemingly mundane rings that attach your camera strap, but there’s a little bit of a story behind these, so here goes: When we started development on our F1 Series camera straps, we were shocked at how difficult it was to find strong, round, smooth split rings.

All of the US-made rings we tested were strong — but had jagged, angled ends. That’s because US split ring production is aimed at the fishing tackle industry, where angled ends make them easier to thread onto fishing line and lures … Not great for camera straps though.

Most of the imported rings we tested had nice smooth ends, but failed our strength tests miserably (yes — we test everything). Some of the “strong” imported split rings failed at under 20lbs (9.1kg) … Not good!

We weren’t content to settle for either, so we developed our own — and after many months of prototyping, we’re happy to report they tick all the boxes: strong, smooth, and made to the highest tolerances in USA.

Specs

Tensile Strength

Standard – 60lbs (27kg), Heavy-Duty – 80lbs (36kg)

Dimensions

Standard — Inside Diameter: .442" (11.22mm), Outside Diameter: .540" (13.71mm), Thickness: .073" (1.85mm), Wire Gap: .064" (1.62mm)

Heavy-Duty — Inside Diameter: .423" (10.74mm), Outside Diameter: .542" (13.77mm), Thickness: .083" (2.11mm), Wire Gap: .236" (6mm). Uniquely designed to reduce wear on quick-connectors like Peak Design Anchor Links™ or OpTech USA Mini QD Loops™ with a wider, less-angular gap between the wire ends, which doesn’t compress the cord loop against cut metal.

Composition

Steel and Magnesium Alloy, Nickel-Plated for Corrosion Resistance

Origin

Made in USA

Quantity

4 Rings per Pack

How-To

Install a Lug Mount F1 Series Strap, or Split Rings

*If you’re just installing Simplr Split Rings, not an F1 camera strap, you can skip straight to 1:07 in this video. Mounting a camera strap with split rings is just like putting a key on a keychain — but instead of a key, it’s a camera. Situate your Lug Mount F1 or F1ultralight so the […]

Who Needs These?

Our split ring 4-packs are intended as an upgrade for non-Simplr straps, as a premium-quality replacement part, or for DIY’ers.

Simplr lug mount camera straps already have our split rings built-in — so if you’re getting one of those, you don’t need to order split rings.

Customer Reviews

4.88 out of 5 stars

26 reviews

Already have it? Share your thoughts.

0 reviews with a 4-star rating

There are no reviews with a 4-star rating yet

×

Sign In

Continue as a Guest