So you want to make a paracord camera wrist strap. Great! We love DIY. It’s how Simplr began — making one strap for myself.

A Short Rant on What’s Wrong with Most Camera Wrist Straps (opinionated)

Just as our camera straps are a little “different”, so too is our suggestion for a DIY paracord wrist strap — and if you use a mirrorless, micro four-thirds or compact camera, you’ll find this article particularly relevant.

Commercial wrist straps tend to be overly complicated and bulky — more focused on looks than function. At Simplr we’re all about getting rid of excess bulk — and if you’ve got a smaller camera, why would you want a wrist strap as thick or inflexible as a garden hose? It’s just silly.

When to Use a Camera Wrist Strap (highly opinionated)

We like camera wrist straps for two things:

1. Cameras that are too small for a neck strap: If you’ve got a pocketable camera, like a Ricoh GR — you don’t absolutely need a neck strap (there’s a good chance you’re here because you already know this). A wrist strap can be much better-suited to these really small cameras.
2. For occasions when a neck strap is superfluous: Maybe you’re shooting handheld video. Maybe you’re in the studio or just shooting stuff around the house. These are times when a neck strap is superfluous … but you’ll still want a little insurance policy to guard against drops

Don’t be that guy or girl, swinging your big camera from your wrist as you stroll along, as if it were some kind of pendulum:

“Hey, I don’t remember that scratch/ding on there,” –or– “What the heck happened to my lens?”

Your camera should be in your hand most of the time. There’s no reason to be hanging six pounds off your wrist all day. Your wrist strap should be your insurance policy against drops.

… Voila, this (less bulky) paracord camera wrist strap.

What We’ll be Making

A non-braided paracord camera wrist strap with a quick-release  — a nice, utilitarian design that’s strong enough for a DSLR, yet packs small. You don’t need much to make it, and the total time is about 20 minutes. Once finished, you’ll have a very useful accessory that takes up virtually no space in your camera bag.

Paracord Camera Wrist Strap Materials

1. 550 Paracord — available from Lowes, Home Depot and about about a zillion places.
2. 3/8″ Quick-Disconnects — These are the ones we like, but you’re welcome to use others.

Tools Needed

• Scissors or Sharp Knife (No, we’re not responsible if you cut yourself.)
• Lighter or Matches (Don’t burn yourself either.)

How to Make It

1. Figure out how big to make the loop. Your preference may vary, but around 8″ would be a good starting point. Paracord is cheap and plentiful so there’s no reason to obsess over this … You can always make one that’s bigger or smaller if you’re not happy with the size of the first one.
2. Tie a knot. You can tie a simple overhand knot at the end. Our preference would be something a little bigger that you can hold onto, like a lanyard knot.

   

3. Finish the loose ends. Clip the loose ends of the string, then melt with a lighter so they don’t fray.
4. Attach it to the female connector. Feed the loop end through the connector. It’s easier if you use a loop of string or dental floss to pull it through. You could loop it once around (like the way the string attaches to the strap lug) or you could do something a little bit more decorative, like this:

   

   

That’s it. Cheap, useful and good-looking.